Sound Level Meter

Approx. Rs 4,000 / PieceGet Latest Price

Product BrochureProduct Details:

Features:

• Large LCD display, easy to read.
• Time weighting and frequency weighting meet , IEC 61672 type 2.
• A & C weighting networks are conformity to standards.
• 0.5" standard out size of the microphone.
• Time weighting (Fast & Slow) dynamic characteristic modes.
• AC / DC output for system expansion.
• External calibration VR.
• Condenser microphone for high accuracy & long-term stability.
• MAX. HOLD function for stored the maximum value.
• Warning indicator for over and under load.
• Low battery indicator.
• LCD display for low power consumption & clear read-out even in bright ambient light condition.
• Used the durable, long-lasting components, including a light weight ABS-plastic housing case.
• Pocket and light weight design allow one hand operation.
• Power by 006P DC 9V battery or DC 9V adapter.

Specifications:

• Function dB (A & C weighting), Time weighting (Fast, Slow), Max. hold, AC output, DC output.
• Measurement A Weighting- 3 ranges, 30 to 130 dB. Range C Weighting- 3 ranges, 30 to 130 dB.
• Accuracy 1 k Hz - ± 1.5 dB ( after cal.) (23± 5 ¿¿¿) * Meet IEC 61672 type 2, tested under input signal level on 94 dB & frequency range from 31.5 Hz to 8 k Hz.
• Microphone type Electric condenser microphone.

Approx. Rs 8,700 / UnitGet Latest Price

Product BrochureProduct Details:

The Amprobe SM-10-A Sound Meter has been designed to check compliance with safety regulations and perform acoustic analysis by safety engineers, health, industrial and safety offices as well as quality control.

They use two different weighting filters required by the IEC651 and ANSI S1.4 Type 2 for audio filtering. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc.)

Features:

• Designed to meet the measurement requirements of safety engineers, health, industrial safety offices and quality control in various environments.
• A and C weightings for checking compliance with safety regulations as well as acoustic analysis
• Measuring ranges: A weighting 30 ~130dB C weighting 35~130dB
• Frequency range: 31.5Hz~8KHz
• Display with 0.1dB steps on a 4 digits LCD
• Slow (1 sec) and fast (125ms) response settings to check peak and average noise levels
• Max/min recording
• Data Hold to freeze reading on digital display
• Accessories supplied: carrying case, windscreen, user manual and 9V battery
• CE, designed to meet IEC651 type2, ANSI S1.4 type2

 

Approx. Rs 6,000 / OnwardsGet Latest Price

Product BrochureProduct Details:

Features:

• Large LCD display, easy to read.
• Max. Hold function for stored the maximum value on display.
• Frequency weighting networks are designed to meet the IEC 651 type 2.
• Warning indicator for over and under load.
• LCD display for low power consumption & clear read-out even in bright ambient light.
• A & C weighting networks are conformity to standards.
• Time weighting(FAST & SLOW) dynamic characteristic modes.
• Used the durable, long-lasting components, including a strong,light weight ABS-plastic housing case.
• AC/DC output for system expansion.
• Build in adj. VR is available for easy calibration.
• Small and light weight design allow one hand operation.
• Condenser microphone for high accuracy & long-term stability.
• Low battery indicator.

Specifications:

• Display 18mm (0.7") LCD (Liquid Crystal Display), 3 1/2 digits.
• Function dB (A & C frequency weighting), Time weighting(Fast, Slow), Max. hold, AC & DC output.
• Measurement Range 3 ranges, 30 to 130 dB, input signal only..
• Calibrator B & K (Bruel & kjaer), multi-fuction acoustic calibrator, model : 4226.
• Microphone type Electric condenser microphone.
• Size of microphone 1/2 inch standard size.
• Range selector 30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 50 dB on each step,with over & under range indicating.
• Time weighting Fast - t= 200 ms, Slow - t = 500 ms, (Fast & Slow) * "Fast" range is simulated the human ear response time weighting."Slow" range is easy to get the average values of vibration sound level.
• Calibration: * Build in external calibration VR, easy to calibrate by external screw driver. *Internal oscillation system, 1 KHz sine wave generator.
• Output Signal AC output - AC 0.5 Vrms corresponding to each range step.DC output - DC 0.3 to 1.3 VDC, 10 mV per dB.Out put impedance - 600 ohm.
• Output terminal 3.5 mm phone output terminal is provided for connection with analyzer, level recorder, taperecorder.
• Battery(heavy duty type).

Approx. Rs 4,200 / UnitGet Latest Price

Product BrochureProduct Details:

Sound Level Meter has been designed to meet the measurement requirement of noise engineers, noise quality control & health prevention in various environments, such as noise measurement in factory, Office, Traffic Road, Family & all other noise measurement applications

Features:

• A/C Frequency weighting selection
• Automatic Backlight
• Auto Power off 10 minutes
• PWM signal output
• Calendar function
• 4700 data record function

 

General Specifications:

• Frequency weighting : A & C
• Time Weighting : FAST / SLOW
• Sampling rate : 2 times / second
• Microphone : ½ inch polarization capacitance microphone USB interface AC / PWM output Max reading
• Overload indication : OVER / UNDER Low battery indication
• Power Supply : 4 x 1.5V AA or DC 6V 100mA adapter
• Dimension : 70 x 35 x 256 mm
• Weight : Approx. 308g (including battery)

Approx. Rs 7,500 / UnitGet Latest Price

Product BrochureProduct Details:

Features:

• Max & Min Measurement
• Over Range Display
• Under range display
• A & C Weighting
• FAST & SLOW response
• Analog AC/DC Outputs for connection to frequency analyzer or X-Y shaft recorder
• Datalogger function
• Adjustable Alarm Levels
• Backlight
• USB Computer Interface ( advanced Software program for all Windows)

 

Approx. Rs 1,550 / UnitGet Latest Price

Product BrochureProduct Details:

Accessories:

• Carrying Case
• Inst. Manual
• 9V Battery (installed)

Approx. Rs 2,700 / UnitGet Latest Price

Product BrochureProduct Details:

Features:

•  10mm(0.4") LCD Display
•  Auto Manual Shutdown
•  Low Battery indicator
•  DC Output : 0 ~ 1.3V 10mV/db  'A', 'C' or 'Flat' weighing with Slow / Fast response  94dB in Full calibration at (1KHz)  Optional RS-232 
• Communication (Advanced Software program for all windows)  Alarm Volume o/p : 30 ~ 130dB  
• Alarm Volume o/p : LED Optional Relay output  Backligh

Approx. Rs 4,000 / OnwardsGet Latest Price

Product BrochureProduct Details:

Sound levelmeasuring instrument testo 815

• Accuracy: Class 2L (Model 816) & Class 3L (Model 815)
• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to Characteristic A and C
• Maximum and minimum value memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• Automatic range switch over (Model 816)
• Backlit display (Model 816)
• BarGraph display (Model 816)
• AC output to connection from recorders and amplifiers (Model 816)
• DC output with 10 mV/dB to connect recorders or data loggers (Model 816)

Approx. Rs 4,000 / UnitGet Latest Price

Product BrochureProduct Details: