Deluxe Electrical

RISH Clamp 1000A/300A measures important electrical parameters like AC Current (TRMS), DC Current, AC Voltage(TRMS), and DC Voltage. It also features Capacitance, Ohm & Continuity, frequency, and Duty cycle and temperature measurement.

RISH Clamp Es1000 AC/ES400 AC measures important electrical parameters like AC Current, AC Voltage, and DC Voltage. It also features Capacitance, Ohm & Continuity, frequency, and Duty cycle and temperature measurement. 

Confidently take reliable readings with the true-rms, Fluke 355/353 Clamp Meters; the tools of choice for high-current measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors typically found in highcurrent applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings, add an extra element of protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors, and industrial service technicians.

The new Fluke 302+, 303 and come with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements upto 600 A (303), a large 30 mm jaw opening and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

The Fluke 323, 324 and 325 Clamp Meters are designed to perform in the toughest environments and provide noise-free, reliable results users can trust to confidently diagnose problems. True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians.

DC, CURRENT, AC CURRENT, DC VOLTAGE, AC VOLTAGE, RESISTANCE, TEMPERATURE, FREQUENCY, DUTY CYCLE, CAPACITANCE, APO, DIODE TEST, hFE, Trms, NCV

Features:
Display : 3 Digits, 6000 Counts Trms
Auto Power-Off : If the meter is idle for 15 minutes, the meter will
automatically turn off.
Operating Temperature & Humidity : 0°C ~ 40°C (32°F ~ 104°F & ≤ 80% RH
Storage Temperature & Humidity : -10°C ~ 50°C (14°F ~ 122°F)
Battery : 9V Battery (6F22)
Safety Regulations : As per GB4793-1, IEC 61010-1, CAT II 600V
Low Battery Indication : “ ” is displayed
Data Hold
Back Light
NCV (Non Contact Voltage)
Jaw Opening : 28mm
Dimensions : 140 x 70 x 35mm (Approx.)
Weight : 180gms. Approx (With Battery)
Accessories : Test Leads x 1
Instruction Manual x 1
K-Type Thermocouple Leads x 1
Carrying Case

Stakeless earth ground loop and ac leakage current clamp for fast, safe indoor/outdoor earth ground resistance and ac leakage current tests. Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes. Stay on line—identify ground loop resistance without the need to disconnect then reconnect the earth electrode from the system. The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind of high-quality, rugged tool you expect from Fluke. Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.

The new Fluke 362 Clamp Meter is designed to t easily in your pocket. The small 18 mm triangular jaw allows access into tight places where other clamp meters can’t reach, while providing the accuracy you can trust from a Fluke tool. This durable clamp meter is a must-have for basic clamp measurements. 

Ground-pile clamp ground resistance tester, also known as loop resistance tester, is used to test ground resistance. This meter uses a brand new 2.4-inch luxury color screen design, with clamp resistance, three or four-wire resistance, AC voltage, current measurement functions, and also has data storage, data access, alarm, automatic shutdown and other functions. The whole machine is beautiful and high-grade, wide range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, and strong anti-interference ability. Moreover, it has a shock-proof, dust-proof, and moisture-proof structure. It is a commonly used and indispensable instrument for telecommunications, electric power, meteorology, computer rooms, oil fields, electromechanical installation and maintenance, and industrial enterprises that use electricity as industrial power or energy. It is suitable for measuring grounding resistance of various telecommunications, electricity, meteorology, computer rooms, oil fields, power distribution lines, transmission lines of iron towers, gas s t a t i o n s , f a c t o r y g r o u n d i n g g ri d s , l i g h t n i n g r o d s , e t c . The ground pile clamp ground resistance tester is controlled by a microprocessor and can accurately detect ground resistance. It uses fast filtering technology to minimize interference. At the same time with data storage and data upload functions.
FEATURES:
● Clamp resistance range : 0.00Ω-1500Ω
● Leakage current range : 0.000mA-40A
● Current resolution : 1uA
● Three-four-wire method range: 0.00Ω-3000Ω
● Ground voltage range: 600V
● Built-in rechargeable battery
● TFT color screen display
● USB data upload function
● Data storage
● Real-time battery power indicator
● Back light
● Alarm function
● Low battery voltage indication
● Overload protection
● yes
Accessories:
Test leads, Simple test leads, USB cable, Charger, Software CD
Instruction Manuals, Instruments box
Technical Specification

Function Ground resistance test, loop resistance test, AC current test, AC voltage test
Accuracy guaranteed temperature and humidity 23 °C ±5 °C , below 75%rh
Power supply DC 3.7V lithium battery
Resistance resolution 0.01Ω
Current resolution 0.001mA
Voltage resolution 0.01V
Clamp size 68mm
Display 2.4 inch color LCD screen
LCD Size 46mm×29mm
Meter Dimension 273mm×106mm×53mm
Measure time 1 time/sec
USB With USB interface, uploaded the data to the computer, saved and printed Communication line USB communication line 1

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people; clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex™ flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Accuracy is ± (% readings digits + number of digits) or otherwise specified, at 23 C ± 5 C & less than 75% R.H. True RMS Model KM 2777 voltage accuracies are specified from 5% to 100% of range or otherwise specified. Maximum Crest Factor <1.4:1 at full scale & <2.8:1 at half scale, & with frequency components within the specified frequency bandwidth for non-sinusoidal waveforms.

Accuracy is ± (% of reading digits + number of digits) or otherwise specified, at 23 C ± 5 C Maximum Crest Factor <2 :1 at full scale & <4:1 at half scale or otherwise specified, and with frequency spectrum not exceeding the specified frequency bandwidth for non-sinusoidal waveforms.

Accuracy is ± (% readings digits + number of digits) or otherwise specified, at 23 C ± 5 C 0 True RMS model ACV, DC+ACV, ACA & DC+ACA accuracies are specified from 5% to 100% of range or otherwise specified. Maximum Crest Factor <1.4:1 at full scale & <2.8:1 at half scale, & with frequency components within the specified frequency bandwidth for non-sinusoidal waveforms.

Accuracy is ± (% of reading digits + number of digits) or otherwise specified, at 23 C ± 5 C & less than 75% R.H.

Basic accuracy figures for measurement ranges are indicated in parentheses. Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year, Product warranty period is 3 years.

About this item

• Wrist Type High Voltage Approach Electric Alarm provides a safe, practical & convenient new type high voltage alarm device for close-electric operator.
• During live electric working, the safe distance between operator & live body should not be closer than the requirement of relevant working regulations.
• After the operator wearing this alarm, when close to the high voltage charged body for a certain distance, according to the corresponding safe distance of voltage level, the alarm will make out the sound & light alarm to remind the electrical workers to pay attention to safety & avoid high voltage electric shock accidents
• The safety distance is in accordance with “GB26860-2011 Electric Power Safety Working Regulations-Electrical Part of Power plants & Substations & GB 26859-2011 Electric Safety Working Regulations-Power Line Part
• The pack contains Alarm, CR1632 Button Battery, Plastic Coin (use for replace battery) & Instruction manual.

Two ways to convert alternating current to RMS are “true RMS response” and “average rectifi ed RMS response” (averaging). Both display the same value for a sine wave, but can display very different values for distorted waveforms.

Accuracy is ± (% reading digits + number of digits) or otherwise specified, at 23 C ± 5 C & less than 75% R.H. True RMS accuracy of ACV is specified from 5% to 100% of range, & ACA is specified from 10% to 100% of range, or otherwise specified. Maximum Crest Factor <1.75 : 1 at full scale & <3.5 : 1 at half scale, and with frequency spectrums, besides fundamentals, fall within the meter specified AC bandwidth for non-sinusoidal waveforms.

Accuracy is ± (% of reading digits + number of digits) or otherwise specified, at 23 C ± 5 C Maximum Crest Factor <2.5:1 at full scale & <5:1 at half scale or otherwise specified, and with frequency spectrum not exceeding the specified frequency bandwidth for non-sinusoidal waveforms.

Accuracy is ± (% of reading digits + number of digits) or otherwise specified, at 23 C ± 5 C Maximum Crest Factor <2.5:1 at full scale & <5:1 at half scale or otherwise specified, and with frequency spectrum not exceeding the specified frequency bandwidth for non-sinusoidal waveforms.

Meco 3150 Digital AC Clamp Meter Just a single conductor is ordinarily gone through the test. Specifically, if the brace is shut around a two-conductor link conveying capacity to gear, a similar current streams down one conductor and up the other; the meter effectively peruses a net current of zero.

Features of Meco 3150 Digital AC Clamp Meter :

• Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.
• Polarity: Automatic, positive implied, negative polarity indication.
• Over Range: (OL) or (-OL) is displayed. Zero.
• Automatic.
• Battery life: 200 hours typical Audible.
• Continuity test Diode Test Functions Bus Bar opening 16×65 mm Select Button Data Hold Button.

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

0.1 mA Current Resolution. True RMS Measurement for all applications. Backlight function. MAX MIN measurement function. Data Hold function & CAT IV 300V. Auto Power Off. Autoranging.  

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

Since the starting in year 1976, Deluxe Electric Corporation, is one of the successful traders and suppliers of Electrical Testing Equipments. The organization has supplied immense range of products including Digital Clamp Meter, Insulator Testes and Digital Multimeter. The company has provided reliable, sustainable and durable products in the market which have completely satisfied all the various demands of the consumers. The famous and reputed vendor base of the company manufactures products with the high grade raw material and with the utmost technical equipments and machineries to ensure improved consumption and long lasting life. In addition to that, we also have strict parameters for examining the products before packaging for guarantying the best suitability of the delivered products

— — — — TM AmpTip low-current range calibrated at Jaw-tip for slim-conditions for accurate readings MAX/MIN/AVG Recording mode (Auto ranging) VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives Display Hold & Non-Contact EF-Detection (NCV) — Probe-Contact EF-Detection.

Accuracy is ± (% of reading digits + number of digits) or otherwise specified, at 23 C ± 5 C Maximum Crest Factor <2.5:1 at full scale & <5:1 at half scale or otherwise specified, and with frequency components within the specified frequency components within the specified frequency bandwidth for non-sinusoidal waveforms

400A AC Auto Ranging, 3¾ Digit 4000 Counts, Data Hold, Rel Test, NCV, APO.
400A AC Auto Ranging, 3¾ Digit 4000 Counts, Temperature, Capcitance, Data Hold, Rel Test, NCV, APO
1000A AC Auto / Manual, 3¾ Digit 4000 Counts, Temperature, Capcitance, Data Hold, Hz/Duty, NCV, APO

The Metravi PRO Solar-3 is a professional T-RMS Industrial Clamp Meter with TFT Colour Display, featuring fast A/D Converter and high accuracy. Makes it easy to find and solve problems in production equipment with Trend Capture and helps with Bluetooth data transfer & analysis reports using free App on your Smartphone. Ensures safe measurements with double-moulded plastic housing, IP65 waterproof certification, CATIV 600V, CATIII 1000V & CATII 1500V categorisation. Measures upto 1500V DC measurement, and hence, is most suitable for Solar and Photovoltaic Applications. In-rush current, VFD and Loz measurement functions make it a must for all Motor Applications too.

? For HVAC application ? Fully auto ranging on all functions. ? Overload protection on all ranges. ? Data - Hold, Max. Hold function ? Simultaneous A + V, A + Ω, A + °C ? Diode test & fast audible continuity Auto power off

Confidently take reliable readings with the true-rms, Fluke 355/353 Clamp Meters; the tools of choice for high-current measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors typically found in highcurrent applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings, add an extra element of protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors, and industrial service technicians.

The KM 071 Milliamp Process Clamp Meter is a Hand-held battery operated clamp meter that measures 4-20 mA DC without breaking the electrical circuit. Unlike conventional clamp meters, this meter features a small jaw that easy to reach any place there is a cable carrying with a current.. This meter takes a magnetic modulated technology, it can reach excellent sensitivity with great anti Earth Magnetical Field ability.

Description:
New Alcohol Tester AT202, with unique design, compact structure, and easyoperation, it could be your very portable alcohol testing instrument. It’s slide cover
design providing users contactless blowing method, ensuring our health and safety,
meanwhile, no need of the blowing mouthpieces, it could save money and environment
protective. Two AAA batteries power could offer 200 times blowing, saving energy. It
has more, indicating the blowing times left at each power on, let users know their
testing times. New AT202 your best choice.
FEATURES:
● Slide cover design, contactless blowing method, ensuring user’s health and safety
● LCD display, high definition
● Semi-conductor sensor, very stable
● 2*AAA battery, portable and easy to change
● Green and red indicating lights, easy to understand
● Accuracy could be matched at ±0.03mg/l, high reliable performance
● Low cost, high efficiency